Nut slots

nut slot depth   Dan nut slot height

Default Re: Nut height For me… the smaller diameter unwound ones usually get a slot at least as deep as the string… which could be 011 on a

it's not worth trying if you don't use actual nut files Yes it is possible to slot nuts with welding tip files and strings super glued to The best test for nut slot height is to fret the string between the 2nd and 3rd frets, then tap the string down right over the 1st fret If

book of captain silver slot The depth can simply be done with the nut in place and using a 012 feeler gauge or a 12 string as a feeler gauge to measure the gap between Generally, the bottoms of the nut slots should be a few thousandths of an inch higher than the tops of the frets when the neck is straight To